Elation fixtures use different methods for installing firmware updates depending on the product series and fixture generation. Before performing an update, always confirm that you are using the correct firmware file and update method for your specific fixture.
C-LOADER Software Uploader
The C-LOADER is a handheld, battery-powered firmware uploader used to install firmware on compatible Elation fixtures. Firmware files are stored on a Micro SD card inserted into the C-LOADER, which connects to compatible fixtures using a 3-pin DMX connection.
The C-LOADER is applicable to fixtures within the following Elation product series:
PULSE Series
KL Series
SŌL Series
VOLT+ Series
REBEL Series
FUZE Series
SIX / SIX+ Series
SEVEN Series
PALADIN Series
C-LOADER Software Uploader product page
E-LOADER III Software Uploader
The E-LOADER III is a handheld, battery-powered firmware uploader designed for compatible Elation automated fixtures. Firmware files are stored on a Micro SD card and transferred to the fixture through the appropriate connection.
The E-LOADER III is applicable to fixtures within these Elation product series:
PROTEUS Series
PARAGON Series
ARTISTE Series
RAYZOR Series
E-LOADER III Software Uploader product page
Ethernet Firmware Updates
Selected PROTEUS and PARAGON fixtures also support firmware updates through their Ethernet connection, providing an alternative to using the E-LOADER III.
Ethernet firmware update capability and procedures may vary depending on the specific fixture model and currently installed firmware version.
Before attempting an Ethernet firmware update:
Confirm compatibility. Verify that Ethernet firmware updating is supported by your exact fixture model and firmware version.
Download the correct firmware. Visit the fixture's product page on ElationLighting.com and download the latest available firmware for that specific model.
Connect via Ethernet. Connect the fixture to the computer using the fixture's Ethernet connection. A direct Ethernet connection may be recommended when performing or troubleshooting an update.
Follow the applicable update instructions. Use the firmware update instructions and Elation update utility specified for your fixture and firmware release.
Never install firmware intended for a different fixture model.
If Ethernet update instructions are not included with the firmware download, or you are unsure whether your fixture supports Ethernet updating, contact Elation Service before proceeding.
Which Update Method Should I Use?
Product Series | C-LOADER | E-LOADER III | Ethernet Update* |
|---|---|---|---|
PULSE | ✓ | ||
KL | ✓ | ||
SŌL | ✓ | ||
VOLT+ | ✓ | ||
REBEL | ✓ | ||
FUZE | ✓ | ||
SIX / SIX+ | ✓ | ||
SEVEN | ✓ | ||
PALADIN | ✓ | ||
PROTEUS | ✓ | ✓* | |
PARAGON | ✓ | ✓* | |
ARTISTE | ✓ | ||
RAYZOR | ✓ |
*Ethernet firmware updating is available on selected compatible fixtures. Always verify compatibility for the specific fixture model and firmware version before proceeding.
Before You Start
Before performing any firmware update:
Identify the exact fixture model.
Visit the fixture's product page on ElationLighting.com.
Download the latest firmware available for that specific fixture.
Confirm which update method is supported.
Follow any instructions supplied with the firmware release.
Do not interrupt power or disconnect the fixture while a firmware update is in progress unless specifically instructed to do so.
Contact Elation Service for available fixture software updates, firmware compatibility, and confirmation of the correct update method. Visit the individual product page for the latest firmware available for your fixture.
If your fixture or product series is not listed above, contact Elation Service before attempting an update.