Overview
This page is a template for presenting firmware updates, version history, and release notes for a lighting fixture. It follows the general structure used by lighting manufacturers to help users find the current firmware version, download it, and understand what has changed between releases. Replace the bracketed placeholders with the manufacturer's actual product and firmware details before publishing.
[confirm: which fixture ranges this applies to]
Checking your current firmware version
Before updating, confirm which firmware version is currently installed on the fixture. This is normally done through the fixture's onboard menu or display.
Enter the fixture's setup or system menu.
Locate the item labeled firmware version, software version, or similar.
Note the version number and compare it against the latest available release listed below.
[confirm: exact menu path and display wording for this fixture]
Downloading firmware updates
Firmware files are typically distributed as a single file or package that is loaded onto the fixture using a USB drive, a network connection, or dedicated update software.
Identify the correct firmware file for the fixture model and hardware revision.
Download the file to a computer or storage device.
Verify the file has downloaded completely before attempting to use it, since an incomplete file can cause an update to fail partway through.
[confirm: download location, file naming convention, and supported update methods]
Update procedure
The general steps for applying a firmware update are as follows. Specific menu names, connector types, and confirmation prompts vary by fixture.
Confirm the fixture is connected to a stable power source and will not lose power during the update.
Load the firmware file onto the fixture using the supported method (USB, network, or update software).
Start the update process from the fixture's menu or the update software.
Wait for the update to complete without interrupting power or disconnecting the update device.
Restart the fixture if prompted.
Check the firmware version again to confirm the update was applied successfully.
[confirm: fixture-specific update method, connector type, and any required update software]
Firmware history and release notes
Each firmware release should be listed with its version number, release date, and a summary of changes. A typical entry includes:
Version number
Release date
New features added
Bugs fixed
Known issues remaining
[confirm: version numbers, release dates, and change details for this fixture's firmware history]
Troubleshooting
If an update does not complete successfully:
Check that the firmware file matches the fixture model and hardware revision.
Confirm the fixture had continuous power throughout the update.
Retry the update using a freshly downloaded copy of the firmware file, in case the original file was corrupted or incomplete.
If the fixture does not respond after a failed update, consult the recovery procedure for that fixture.
[confirm: fixture-specific recovery procedure if an update fails]